Support
Q. How do I disassemble the chair?
-
■ If you need to disassemble the chair for moving or other reasons…
- * Gas cylinders are difficult to remove once assembled, but may be removed by using a rubber hammer.
- * Do this at your own risk. We are not liable for injury or damage caused by the work.
- * Please wear non-slip gloves when working to avoid injury.
- * It may or may not come off easily depending on the usage. If the chair is not used much, it may come off relatively easily.
-
1. First, remove the metal part of the seat support from the seat surface. (Remove the screws.)
-
2. Remove the legs from the removed seat support metal part.
Use a commercially available rubber hammer or similar tool to avoid scratching the parts.
Tap the red circle part of each leg repeatedly and remove it with the vibration.
- * There is no need to hit it hard, just be careful not to damage the parts.
- * Please be careful not to injure yourself as the detached legs may fall.
-
3. After the legs are removed, remove the gas cylinder from the seat support metal part in the same way.
Tap the red circle part on the metal part of the seat support lightly and repeatedly to remove it by vibration.
- * There is no need to hit it hard, just be careful not to damage the parts.
- * Please be careful not to injure yourself when the metal part of the seat supporter falls.
-
■ Product Disposal
When disposing of the product, be sure to dispose according to the disposal classification of each local government.
Never disassemble the gas cylinder. It is very dangerous.