Support

Q. The leg pipe has come loose beyond the limit line and cannot be put back together.

  • ■ Step 1 Adjust the pulley to the direction shown below.

    Step 1 Adjust the pulley to the direction shown below.
  • ■ Step 2 Firmly grip the elevation lock lever.

    Step 2 Firmly grip the elevation lock lever.
  • ■ Step 3 While holding down the elevation lock lever, slowly insert the unit vertically.

    Step 3 While holding down the elevation lock lever, slowly insert the unit vertically.
    • * If you push it too hard, it may be damaged. Be sure to insert the product while holding the elevation lock lever.
    • * If you cannot insert it properly, please check steps 1 and 2 again.
  • ■ Step 4 Check that the lifting and lowering operations can be performed normally, and then you are done.

    Step 4 Check that the lifting and lowering operations can be performed normally, and then you are done.
  • Please refer to the video to see how to do the above.