search
HOMEFAQDesk

  • ■ Our gaming desks that can install a 700 mm wide keyboard slider are the followings:

    • ・Gaming desk（ BHD-1000M / BHD-1200M ）
    • ・Low desk（ BHD-1000L / BHD-1200L ）
    • ・Gaming desk HD（ BHD-1200HDL / BHD-1200HDM ）

    * The keyboard slider cannot be attached to the SA gaming desk (BHD-1200SAL/BHD-1200SAM) due to the structure of the desk.

  • ■ Our gaming desks that can install a 1000 mm wide keyboard slider are the followings:

    • ・Gaming desk（ BHD-1200M ）
    • ・Low desk（ BHD-1200L ）
    • ・Gaming desk HD（ BHD-1200HDL / BHD-1200HDM ）

    * The keyboard slider cannot be attached to the SA gaming desk (BHD-1200SAL/BHD-1200SAM) due to the structure of the desk.

The space between the keyboard slider top plate and the desk is approximately 72 mm.

Please use a keyboard up to that height.

The slider rail of the standing desk is welded to the legs and cannot be removed.

Please use the keyboard slider while using.

The cable clip can be attached to the desired position on the back of the top board.

Please place the cable clip on the desired location and fix it with screws.
* There is no pilot hole.

The cable clip can be attached to the desired position on the back of the top board.

  • ■ Step 1 Adjust the pulley to the direction shown below.

    Step 1 Adjust the pulley to the direction shown below.

  • ■ Step 2 Firmly grip the elevation lock lever.

    Step 2 Firmly grip the elevation lock lever.

  • ■ Step 3 While holding down the elevation lock lever, slowly insert the unit vertically.

    Step 3 While holding down the elevation lock lever, slowly insert the unit vertically.
    • * If you push it too hard, it may be damaged. Be sure to insert the product while holding the elevation lock lever.
    • * If you cannot insert it properly, please check steps 1 and 2 again.

  • ■ Step 4 Check that the lifting and lowering operations can be performed normally, and then you are done.

    Step 4 Check that the lifting and lowering operations can be performed normally, and then you are done.

  • Please refer to the video to see how to do the above.